Best Quality VPSA Oxygen Generation System VPSA Oxygen Plant Full Form With Vacuum Air Pump

Technical Specifications 1、Oxygen Output: 50-7500 Nm³/h 2、Oxygen Purity: 28-94% 3、Oxygen Pressure: 0.015-2 MPa 4、Oxygen Dew Point: ≤-45°C   5、Soundproofing: ≤75dB at 1 meter outside the plant

Technical Specifications 1、Oxygen Output: 50-7500 Nm³/h 2、Oxygen Purity: 28-94% 3、Oxygen Pressure: 0.015-2 MPa 4、Oxygen Dew Point: ≤-45°C   5、Soundproofing: ≤75dB at 1 meter outside the plant

BANGWIN Liquid nitrogen generator (liquid nitrogen machine) equipment consists of nitrogen generator(built-in or external), refrigeration equipment lt consists of three parts: equipment (gas liquefaction equipment) and Dewar tank The whole machine has one-button startup and automaticreplenishment.Liquid function, the equipment automatically starts when the liquid nitrogen inthe liquid nitrogen tank is lower than the set liquid level. Liquid nitrogen machine The manufacturing adopts the mixed working fluid throttling refrigeration principle to gradually cool nitrogenfrom ambient temperature to nitrogen.The saturated condensation temperature of gas lique.faction, the lowest cooling temperature of the refrigerator can reach -196°C, and the systemwill The liquefied liquid nitrogen in the cold evaporator is transported to the liquid nitrogen tankfor storage to obtain liquid nitrogen, and the equipment automatically detects it.Liquid nitrogenlevel in the Dewar tank.

 The small liquid nitrogen machine works by using compressed air to cool and compress nitrogen gas into a liquid state. The liquid nitrogen is then stored in a tank and used for various applications, including cryopreservation, food processing, and medical treatments.

Methane storage tanks are devices used to store methane gas and are widely used in the energy and chemical industries. Methane is a colorless, odorless, and non-toxic natural gas, primarily composed of methane (CH4), and is an important fuel resource. Methane is a common natural gas, and it is also a flammable and explosive gas. Under normal conditions, methane is a colorless, odorless, and non-toxic gas, but it has high flammability and explosiveness. Therefore, special care must be taken during storage and transportation to avoid harm to human health and the environment.

One-button power-on, fully automatic rehydration! The small integrated liquid nitrogen machine is an ideal choice for your laboratory. Using advanced mixed environmentally friendly refrigerants, our liquid nitrogen machine can cool nitrogen to a liquefied state step by step, and the refrigeration temperature can reach as low as -196°C. The equipment has a one-button start-up automatic liquid replenishment function, which will automatically start when the liquid nitrogen tank is lower than the set liquid level. The product operation interface adopts touch-type color Chinese and English interface, which is convenient for operation. In addition, all cryogenic pipes use vacuum insulated pipes to reduce cold loss and provide efficient refrigeration performance. Choose our products, you will get the advantages of automatic control, environmental protection, energy saving and convenient operation.

CHR series applies complementary powersupply from wind energy, solar energy andelectricityatnighttoproducehydrogen.Then,using metal hydrogen storage technology orcompressedhydrogenstoragetechnologytostore this hydrogen. If lack of electricity, usercan use hydrogen fuel cell to converthydrogen to electricity by configuring DCIACconverter. If hydrogen fuel filling stationneeded,user can configure hydrogenboostingsystemtofillhydrogenintohydrogenfuel cell car, drone, bus, truck, electricvehicleandforklift.

The air enters the air compressor after removing dust and mechanical impurities through the air filter, compressing to the required pressure, and outputting clean compressed air after strict purification treatment of oil, water and dust removal, with the purpose of ensuring the service life of the molecular sieve in the adsorption tower. There are two adsorption towers with carbon molecular sieves, one tower works while the other tower is decompressed and desorbed. The clean air enters the working adsorption tower, passing through the molecular sieve when oxygen, carbon dioxide and water are adsorbed by it, the gas flowing to the exit end is nitrogen and trace amounts of argon and oxygen. Another tower (desorption tower) so that the adsorbed oxygen, carbon dioxide and water from the molecular sieve pores out of the discharge to the atmosphere. In this way, the two towers take turns to complete the separation of nitrogen and oxygen, continuous output of nitrogen, variable pressure (_bian4 ya1) adsorption nitrogen purity of 95%-99.9%, if you need a higher purity of nitrogen need to increase the nitrogen purification equipment. Variable pressure adsorption nitrogen machine output of 95%-99.9% nitrogen into the nitrogen purification equipment, while adding the appropriate amount of hydrogen through a flow meter, in the purification equipment in the oxygen removal tower hydrogen and nitrogen in the trace oxygen catalytic reaction to remove oxygen and then cooled by the water condenser, vapor separator to remove water, and then through the dryer depth drying removal.